Made to order · 2–3 weeks ·
postage calculated via ZIP code
Pick the device first — the models, sizes and colors all depend on it.
The case size is engraved on the back of your watch.
Measure round your wrist where the watch sits.
Not sure which size Apple Watch you have?
Take the watch off and look at the back of the case. Apple engraves the case size there, in small text under the sensor — 38, 40, 41, 42, 44, 45, 46 or 49mm.
Can’t read it? On the watch, open Settings → General → About. That screen gives you the Model Name and Model Number rather than the size, and Apple’s Identify your Apple Watch page matches the number to a case size.
Careful — 42mm means two different watches. Series 1, 2 and 3 came in 38 and 42mm, so on those 42mm is the large one. Series 10 and 11 came in 42 and 46mm, so on those 42mm is the small one. If your watch is a Series 10 or 11, choose the option that says 42mm Series 10/11, not the 42/44/45/46/49mm one.
Which leaves three choices: 38/40/41mm, 42mm Series 10/11 on its own, and 42/44/45/46/49mm for every other case — including the 42mm on a Series 1, 2 or 3.
For the length, measure around your wrist: S/M fits 5.1″–7.1″, M/L fits 5.9″–7.9″. If you are between the two, size up — whichever of S/M and M/L the size list on this page offers for your case.
Those are the same ranges Apple uses for its own Sport Band, so if you know which of Apple’s two sizes fits you, pick the same one here.
Gap Fit or Snug Fit — and which Galaxy Watch is yours?
On the watch, open Settings → About watch (older ones say About device) and read the Model number — it starts SM-R. It is usually printed on the back of the case as well.
The 20mm ones — what these bands are made for — are the original Galaxy Watch 42mm, the Watch Active and Active 2, the Watch 3 41mm, and the Watch 4, 5, 6 and 7 including their Classic and 5 Pro versions.
The 22mm ones are the original Galaxy Watch 46mm, the Watch 3 45mm and the Gear S3. A 20mm band will not fit those.
Galaxy Watch 8 and 9 take neither of those. Samsung changed the fitting, so a Series 1–7 band will not go on — they have their own, which is the Series 8 / 9 option above.
Watch Ultra: message me before ordering. Its fitting is different again and I would rather check than have you send one back.
Gap Fit is the straight 20mm strap. It fits any 20mm lug, Watch 3 included, and leaves a small gap where it meets a round case.
Snug Fit has shaped ends that sit flush against the case with no gap, but it is cut for the Watch 4, 5, 6 and 7 bodies (Classic and 5 Pro included) — it does not fit the Watch 3.
Series 8 / 9 is the same kind of band again, cut for the newer fitting. It is not interchangeable with either of the other two.
Not sure which Pixel Watch you have?
On the watch, swipe down and tap Settings, then System → About. The generation and the case size are both on that screen.
Pixel Watch 1 and 2 were only ever made in 41mm, so if you have either of those there is nothing to work out — the 41mm band is the one.
Pixel Watch 3, 4 and 5 each come in 41mm and 45mm. Check the About screen rather than guessing: 4mm is very hard to judge by eye.
The 41mm and 45mm bands here are different parts — a 45mm band will not go on a 41mm watch.
The bands on sale are listed for Watch 1, 2 and 3 in 41mm and Watch 3 and 4 in 45mm. If you have a Watch 4 in 41mm, or a Watch 5, message first and we will confirm the fit before you order rather than guess it.
Not sure which Fitbit you have?
Turn the watch over and look at where the band meets the case. If you can see a metal pin bridging two little lugs, with a tiny lever you press inward along the pin, you have a Versa, Versa 2, Versa Lite or Versa SE.
If there is no pin and no lugs — the band end slides straight into a slot in the case and is released by a flat button you slide toward the band — you have a Versa 3, Versa 4, Sense or Sense 2.
That one look is more reliable than the model name, because the two generations look almost identical from the front.
These two groups genuinely do not interchange. Fitbit changed the fitting between them, so a Versa 2 band will not attach to a Versa 3 and neither one takes an ordinary watch strap.
Not sure which iPhone you have?
Go to Settings → General → About and read the Model Name line. It says it in plain English — “iPhone 17 Pro Max” — so there is nothing to look up.
Match the whole name. The plain model, Air, Pro and Pro Max are all different cases, and the number on its own will not tell them apart.
Phone won’t turn on? The model number is etched in the SIM tray opening, or inside the charging port, and Apple’s support site turns it into a name.
Screen size is not a shortcut here — the iPhone 16 Pro and the iPhone 17 Pro are both 6.3″ but they are not the same case, so go by the name.
Not sure which Galaxy phone you have?
Go to Settings → About phone (older phones say About device). The name you know it by — “Galaxy S25 Ultra” — sits at the top of that screen.
Underneath it is the Model number, starting SM-, like SM-S938U. That one is set at the factory and never changes, so if anything looks off, go by it — searching it on samsung.com brings up the exact phone.
Match the whole name: Plus, Ultra, FE and E are all different sizes, not trim levels.
Postage calculated via ZIP code.
Item—
Postage—
Total—
Most swatches are sampled from a photo of the real bands, so the
shade is close. A few colors are not on that chart and are still approximated
from the name — and no screen shows a color exactly.
About this design
The design is laser-engraved into the band — cut into the silicone itself, not printed on top, so it will never peel, crack, or wash off.
Made to order in Michigan by a nurse who reads too much.
The Engraving
The design is cut into the band, so it catches the light instead of sitting on the surface. Pick your band color at checkout. The shades on offer vary, so check the list.
The darker the color, the harder the design is to make out — the engraving is cut into the silicone rather than printed on it. Medium shades show it best.
Make It Yours
At checkout you'll be asked which design you'd like.
The Band
Soft, flexible silicone, smooth against the skin
Pin-and-tuck closure, so there's no loose tail to catch
Water resistant — fine for handwashing, workouts and the shower
Before You Order
Every band is engraved once you order, so please double-check your size at checkout. Because each one is made for you, I can't accept returns or exchanges — but if I get the design or the size wrong, I'll put it right. Screen colors vary from device to device, so the shade you see may not be exact.
Questions about a color, or want this design on a size you don't see? Message me and I'll help.
Scissors & Scrubs